Galaxy Dimension Installer Manual
6-150
56 - Communications (cont’d)
56.7.5 Pre Alarm
This option sets the alarm delay recording time. The audio channel will continuously record a rolling 10 sec-
onds of audio. Upon an alarm activation, the system will stop recording and store 10 seconds of audio. The
amount of alarm delay in the recorded audio can be so configured using the pre-listen time parameter.
Pre Listen Time
The alarm delay listen time can be set from 00-10 seconds. Setting the time to 5 seconds (default) means that
there is 5 seconds of pre-alarm and 5 seconds of post alarm audio saved.
To Next Page
Loading...
