Honeywell Galaxy Dimension series User Manual

Galaxy Dimension Installer Manual
5-11
MAX
3
Log
The Galaxy system has a panel dependent event log for recording the MAX
3
activations. This log is shared by
all readers on the system and operates on a first-in-first-out basis for overwriting events when the log is filled.
To display the events in the MAX
3
log select option 25 = ACCESS DOORS; use the A or B keys to select
the required MAX
3
address then press the ent key. The first event that occurred on the selected MAX
3
is
displayed along with details of the time, date and MAX
3
number.
To view the log press the A key to move forward in time through the events or the B key to move backwards.
Press the esc key to return to the MicroMAX address display. To view the log of another MAX
3
, use the A
or B key to select the required address. To escape from the Access Doors option press the esc key.
MAX
3
Events Print-Out
The MAX
3
events can be printed out as they occur to an on-line printer. To print the MAX
3
events ensure
that option 51.27 = PARAMETERS.On-Line Print is enabled. Select option 51.28 =
PARAMETERS.On-Line Level and enter 2 to print out all system events including the MAX
3
events or 3
to print out only the MAX
3
events.
NOTE: A serial printer must be connected to line one of the Galaxy panel and the printer must remain on-line
(ready to print) at all times.
Downloading the MAX
3
/ DCM Log
The MAX
3
/DCM event log can be downloaded to Remote Servicing by using the MAX/DCM Log copy
option in Remote Servicing.
Time and date
of event
MAX
3
user number Event type
02:25 SUN 22 OCT02:25 SUN 22 OCT
02:25 SUN 22 OCT02:25 SUN 22 OCT
02:25 SUN 22 OCT
USR032 ValidUSR032 Valid
USR032 ValidUSR032 Valid
USR032 Valid
Access Control (cont’d)

Honeywell Galaxy Dimension series Specifications

General

Model	Galaxy Dimension series
Users	Up to 250
Partitions	Up to 8
Operating Temperature	-10°C to +55°C
Compatibility	Honeywell Galaxy accessories and peripherals