TR80 - Installation and Operation Guide23
2.6 Adjusting The Fan Speed
Tap to change the fan speed. The settings are slightly different depending on
type of fan. Two types of fans are supported by TR80 wall module such as:
•Multi-Speed Fans
•EC Fans
2.6.1 Multi Speed Fans
In this type of fan, display shows selected fan speed in upper display (OFF/LO/
MED/ HI), AUTO symbol and fan speed is displayed at the bottom. Refer the figure
shown below.
1.Tap in operating mode, to enter in fan speed Setting mode.
2.Tap or , to set the fan speed (OFF, LO, MED, HI, AUTO).
3.After selecting fan speed tap .
4.Tap to exit the mode.
To Next Page
Loading...
