Honeywell TR80

TR80 - Installation and Operation Guide27
The procedure to change the HVAC mode is as follows:
1.Tap , to change the HVAC mode.
The display shows the text and symbol indication of the currently selected
mode.
2.Tap to select the HVAC mode.
Note:Tap to exit this mode without saving the changes.
3.Tap to activate the selected HVAC mode.
2.9 Selecting ECO operation
In some installations, user can select ECO operation. Long-pressing the down but-
ton will toggle the ECO symbol . In ECO operation, the system consumes less
energy.
2.10 Controlling Lights
TR80 allows control of up to 4 lighting groups. The procedure to select group is as
follows:
1.Tap , to enter lighting mode.
The display shows the selected light group, light level and/or scene selected for
that group.
2.Tap , to select another light group.
3.Tap , to exit.
After group selection, one of the following four methods will be available for con-
trolling lights depending on installation.