Hoval Uno-3 - Adapt Hot Water Temperature

HEATING SYSTEM CONTROL
22 4 213 563 / 03
5.7.2 Adapt hot water temperature
1
Touch the displayed water temperature to select it.
You can also access the function for setting the required wa
-
ter temperature using Main menu ( ) > Hot water
(5.12.1
page 58, no. 5).
2
Touch the plus ( ) or minus ( ) button several times to set the required
water temperature.
When a day program is active, the hot water temperature is
only accepted in the active switching cycle.
3
Accept the settings with OK.
4
A change message is displayed. Conrm this with OK. Touch the Back
( ) button if you want to edit the settings again.
5
The current hot water temperature is displayed on the start screen and
goes up or down until the desired water temperature is reached.