Hoval Uno-3 - Emission - Only for Heating Specialist

HEATING SYSTEM CONTROL
674 213 563 / 03
5.12.10 Emission - only for heating specialist
(Main menu / Emission (not in with Heat pumps))
4
7
8
10
9
6 5
1
2
3
No. Designation Function
1 Selection heat generator Display of the heat generators present in the heating system. The ho-
rizontal arrows (
) are used for selecting the required heat generator.
2 Time Duration of emission measurement. Setting the required time with plus
(
) and minus ( ), i.e. to be dened by the heating specialist before the
start of the measurement. The heat generator is switched o󰀨 after the
time has elapsed.
3 Power limitation Entry of the required power limitation. Regulation of the required power
limitation by plus (
) and minus ( ).
4 System information Information about the system in the selected heat generator. Additional
information can be displayed with the horizontal arrows (
).
5 ON Switching on the heat generator
6 OFF Switching o󰀨 the heat generator
7 Position in the menu Name of the currently selected menu item
8 Time of day Displays the current time.
9 Help No function is available at present
10 Back Used as a button (
) for returning to the main menu.
The emission measurement is automatically
deactivated when the “Emission” menu item
is exited!