Hoval Uno-3 - Week Program Operating Elements

HEATING SYSTEM CONTROL
334 213 563 / 03
5.9.3 Week program operating elements
1
10 7
9
5
6
3
4
8
2
No. Designation Function
1 Week program 1 Heating program with individual week cycle 1
2 Week program 2 Heating program with individual week cycle 2
3 Active week program
in heating circuit
Displays the active week program in the heating circuit. The message is not
displayed if neither of the two week programs is operating.
4 For editing active
week program
Marks the week program selected for editing (rename / reset / adapt).
5 Dened week cycle Day programs assigned to the week days. The seven assigned day programs
thus make up the week cycle or the week program.
6 Rename Individual renaming of the selected week program (5.9.5 page 36)
7 Reset Reset the selected week program to the default settings (5.9.6 page 38)
8 Adapt Assignment of the day programs to the individual days of the week (5.9.4 page
34)
9 Back Return (
) to the previous screen.
10 Help Summarised information about the screen area shown above
The illustrated screen is the standard view.
Various elements can be renamed and adap
-
ted by the user in the menu.