Hoval Uno-3 - Reset Day Program

HEATING SYSTEM CONTROL
494 213 563 / 03
5.10.7 Reset day program
1
Touch the Main menu ( ) button to select it.
2
Touch the Programs button to select it.
3
The overview for the heating circuit and the program selection appears.
Select the required heating circuit and then Day programs.
4
Select the desired day program (example: longer day) with the horizon-
tal arrows ( ). Touch the Reset button to reset the settings in the se-
lected day program to their default values.
The names of the day programs may be di󰀨erent if they have
already been changed.
5
A conrmation message is displayed. Conrm this with OK. Press Back
( ) to go back without resetting the program.
The name, the switching cycles as well as the required room
temperatures of the day program are reset to the factory set
-
ting. If the reset day program is used in the week program, the
factory setting is also active for this.