Hoval Uno-3 - Recharging Hot Water

HEATING SYSTEM CONTROL
554 213 563 / 03
5.11.7 Recharging hot water
1
Touch the displayed water temperature to select it.
In connection with the TopTronic
®
E online, the weather fore
-
cast is displayed on your start screen as an option. You can
also access the function for adapting the required water tem
-
perature using Main menu > Hot water (5.12.1 page 58).
2
Touch the active hot water day program to select it.
The hot water day program is independent from the heating
circuit day program. For example, it can be set to “early &
late” while the heating operation is running with “all day”.
3
In the program selection, select the Recharging button.
With “Recharging”, it is possible to heat additional hot water.
The duration and the hot water temperature can be set indi
-
vidually.
4
Press plus ( ) and minus ( ) to set the required duration and water
temperature for recharging. Press OK to accept the settings.
5
Hot water recharging is shown in the menu. Conrm the entries with OK.