Hoval Uno-3 - Info

HEATING SYSTEM CONTROL
654 213 563 / 03
5.12.8 Info
(Main menu / Info)
1
2
4
5
7
6
3
8
No. Designation Function
1 Heat generator /
heating circuits / hot water
Selection of the system part. It is possible to switch between the heat
generator, the heating circuit and the hot water area using the horizontal
arrows (
).
2 Detailed selection Selection of the desired heat generator, heating circuit or hot water cir-
cuit. If the system contains several circuits, this is indicated by the white,
active horizontal arrows (
).
3 Information Information about the selected system area. Additional output information
can be displayed on the screen using the horizontal arrows (
).
4 Position in the menu Name of the currently selected menu item
5 Time of day Displays the current time.
6 Help No function is available at present
7 Back Used as a button (
) for returning to the main menu.
8 Heat generator setpoint With heat pumps:
Under certain circumstances, at very low outside temperatures, it will
not be possible to reach the required domestic hot water temperature
or room temperature (the reference value is changed by the machine so
that there will not be a fault cut-out).