Hoval Uno-3 - Party and Absent

HEATING SYSTEM CONTROL
42 4 213 563 / 03
5.10.3 Party and absent
On the TopTronic
®
E, the day program can be changed
at any time when a week program is active (5.7.5 page
24). If you come home earlier, for example, you can
immediately activate the heating with a suitable day pro-
gram. Furthermore, if you are going to have a party or
if you will be absent for a short time, you can extend or
reduce the heating time with the “Party” or “Absent” pro-
grams.
Day program Possible occasion and function
Party
You have guests in the evening.
• Continued heating operation at the entered room temperature until the end of
the desired period of time (duration)
• The room temperature should not be lowered at the preset time (day program)
Absent
You leave home in the afternoon and will only come back late in the evening.
• (Reduced) heating operation at the desired room temperature until the end of
the entered period of time (duration)
• Calorier frost protected (5 °C)
The two “Party” and “Absent” programs can be selected as follows:
1
Touch the displayed day program to select it (example: early & late).
2
Touch the active day program to select it.
The adaptation to the day program is only accepted in the ac
-
tive week program for the current day. Deactivate the check
-
box for “Only for today”
to store the change in the week
program.
3
Select the desired program, Party or Absent.