Hoval Uno-3 - Set Hot Water Program to Absent

HEATING SYSTEM CONTROL
56 4 213 563 / 03
6
A conrmation message is displayed. Conrm this with OK. Touch the
Back ( ) button if you want to edit the settings again.
7
The current hot water temperature is displayed on the start screen and
goes up or down until the desired water temperature of the recharging
is reached.
5.11.8 Set hot water program to absent
1
Touch the displayed hot water temperature to select it.
In connection with the TopTronic
®
E online, the weather fore
-
cast is displayed on your start screen as an option. You can
also access the function for adapting the required water tem
-
perature using Main menu > Hot water (5.12.1 page 58).
2
Touch the active hot water day program to select it.
The hot water day program is independent from the heating
circuit day program. For example, it can be set to “all day”
while the heating operation is running with “early & late”.
3
In the program selection, select the Absent button.