Hoval Uno-3 - Change Basic and Day Program (Hot Water)

HEATING SYSTEM CONTROL
254 213 563 / 03
4
The selected day program is now displayed with the associated swit-
ching cycles as well as the room temperature.
The room temperature can be adapted again after the new
desired day program has been selected.
5
A change message is displayed. Conrm this with OK. Touch the Back
( ) button if you want to edit the settings again.
6
The new selected day program is displayed on the start screen.
5.7.6 Change basic and day program (hot water)
1
Touch the displayed hot water temperature to select it.
In connection with the TopTronic
®
E online, the weather fore
-
cast is displayed on your start screen as an option. You can
also access the function for adapting the required water tem
-
perature using Main menu > Hot water (5.12.1 page 58).
2
Touch the hot water basic program or hot water day program to select it.
Hot water basic and day programs are independent from the
heating circuit basic and day programs. The hot water basic
program can be set to Week 1
, for example, while the heating
operation is heating with the Constant setting.