HEATING SYSTEM CONTROL
454 213 563 / 03
5.10.5 Change room temperatures and switching cycles in the day program
1
Touch the Main menu ( ) button to select it.
2
Touch the Programs button to select it.
3
The overview for the heating circuit and the program selection appears.
Select the required heating circuit and then Day programs.
4
Select the desired day program (example: longer day) with the horizontal
arrows ( ). Touch the Adapt button to make settings in the selected
day program.
The names of the day programs may be di󰀨erent if they have
already been changed.
5
The overview of the selected day program is opened. Various adaptations
can be made to the selected day program/switching cycle using plus ( )
and minus ( ). Press OK to accept the entry.
Refer to 5.10.4 page 44 for a detailed description of the day
program overview.
To Next Page
Loading...
