138
Figure 56 Select a device class
# Select the 5800_A device class and click OK. After that, the auto deploy configuration page is
displayed. Click OK to complete the task.
Figure 57 Deploying task succeeded
Configuration of the 5800 switches in room B is the same as that of the switches in room A except that
you must perform the following configuration:
• Create device class 5800_B for switches in room B.
• Add switches in room B to the device class 5800_B.
• Bind the configuration file corresponding to switches in room B to the device class 5800_B.
To Next Page
Loading...
