HP 5820X Switch - Page 286

276
configuring NetStream version 9 template refresh
rate, 205
configuring network management-specific interface
index (SNMP), 100
configuring NQA collaboration, 51
configuring NTDP parameters (cluster
management), 147
configuring NTP, 68
configuring NTP authentication, 65
configuring NTP broadcast mode, 62, 71
configuring NTP broadcast mode with
authentication, 76
configuring NTP client authentication, 66
configuring NTP client/server mode, 68
configuring NTP client/server mode with
authentication, 75
configuring NTP multicast mode, 63, 72
configuring NTP optional parameters, 63
configuring NTP server authentication, 67
configuring NTP symmetric peers mode, 69
configuring PD disconnection detection mode (PoE),
88
configuring ping, 1
configuring ping and tracert, 7
configuring PoE, 93
configuring PoE interface power management, 89,
90
configuring PoE interface through PoE profile, 91
configuring PoE monitoring function, 90
configuring PoE power, 89
configuring PoE power management, 89
configuring PoE profile, 91
configuring PSE power monitoring (PoE), 90
configuring remote destination mirroring group (on
the destination device), 173
configuring remote probe VLAN for remote
destination mirroring group, 174
configuring remote probe VLAN for remote source
mirroring group, 173
configuring remote source mirroring group (on the
source device), 171
configuring RMON alarm function, 113
configuring RMON Ethernet statistics function, 112
configuring RMON history statistics function, 112
configuring RMON statistics function, 111
c o n figuri n g sampler, 162, 163
configuring sFlow, 223
configuring sFlow agent, 221
configuring sFlow collector, 221
configuring sFlow counter sampling, 222
configuring sFlow sampling, 222
configuring SNMP, 96, 97
configuring SNMP configuration synchronization
function (cluster management), 156
configuring SNMP logging, 101, 107
configuring SNMP test (NQA), 21, 43
configuring SNMP trap, 102
configuring SNMPv1, 105
configuring SNMPv2c, 105
configuring SNMPv3, 106
configuring statistics collection function (NQA), 29
configuring synchronous information output, 242
configuring system debugging, 6
configuring TCP test (NQA), 22, 44
configuring test group optional parameters (NQA),
31
configuring the NTP symmetric peers mode, 61
configuring threshold monitoring (NQA), 28
configuring tracert, 4
configuring trap parameters (SNMP), 103
configuring UDP echo test (NQA), 23, 45
configuring UDP jitter test (NQA), 19, 20, 40
configuring voice test (NQA), 24, 25, 47