HP 8360 - L-40. the INIT Trigger Configuration; The TRIG Configuration

Idle
_ :ABORt
*RST
Initiate
Sequence
b Instrument
Actions
Figure l-40. The INIT Trigger Configuration
Command Parameters
:ABORt
:INITiate
[:IMMediate]
:CONTinuous state
Parameter Type
I
7
Boolean
Example commands using the INIT trigger configuration:
: ABORt
abort operations, go to idle
:INIT:IMM
execute one sequence operation
:INIT:CONT ON
execute sequence operations continuously
: INIT: CONT OFF
stop sequence operations after the current one is
complete
The TRIG Configuration
Instruments using the TRIG configuration include one event
detection state named TRIG, and a corresponding TRIGger
subsystem. And, all SCPI instruments implement the required
INITiate and ABORt subsystems.
l-l 10 Getting Started Programming