HP 8360 - Programming Language SCPI

Programming Language SCPI
Programming Codes
SCPI: SYSTem:LANGuage CIIL
Analyzer: CIIL
See Also
Adrs Menu
The M.A.T.E. option (Option 700) is documented in a separate
manual supplement called, HP 8360 Series Synthesized Sweepers
Option 700 Manual Supplement.
Programming
Language SCPI
Function Group
Menu Map
Description
Programming Codes
See Also
SYSTEM
8
Standard Commands for Programmable Instruments (SCPI)
is the instrument control programming language adopted by
Hewlett-Packard. SCPI provides commands that are common
from one Hewlett-Packard product to another, eliminating “device
specific” commands.
This softkey lets you select SCPI as the synthesizer’s external
interface language. This is the default language set at the factory.
Any commands issued within 100 ms of a change in language may be
ignored or lost. An asterisk next to the key label indicates that this
feature is active.
SCPI: SYSTem:LANGuage SCPI
Analyzer: SYST or SCPI
Adrs Menu, SCPI COMMAND SUMMARY, SCPI STATUS
REGISTER STRUCTURE
“Getting Started Programming,” in Chapter 1.
“Programming Typical Measurements,” in Chapter 1
HP 8360
User’s Handbook
Operating and Programming Reference P-13