Enter List Offset
Function Group
FREQUENCY
Menu Map
2
Description
This
softkey
lets you enter an offset value for a frequency in the
frequency list. A frequency point must be entered before a power
value can be accepted, otherwise the following error message appears:.
ERROR: Must first enter
aList
Frequency. The rotary knob and
the up/down arrow keys let you scroll through the frequency points
available to change the default power values. An asterisk next to the
key label indicates that this feature is active.
Programming Codes
SCPI: NONE, see List Menu
Analyzer:NONE
See Also
List Menu
“Optimizing Synthesizer Performance” in Chapter 1.
ENTRY KEYS
Function Group
Menu Map
Description
See Also
NONE
NONE
The entry keys consist of, the numeric entry keys (0 through 9),
the decimal point key, the negative sign/backspace key, and the
terminator keys. These keys are active whenever the ENTRY
ON/OFF LED is lit.
ARROW KEYS, ROTARY KNOB
“Entry Area” in Chapter 1.
“Getting Started Programming” in Chapter 1.
E-4
Operating and Programming Reference
HP 8360
User’s Handbook
To Next Page
