HP 8360 - Delta Mkr Ref; Disp Status

Delta Marker
Programming Codes
SCPI: MARKer[n]:DELTa? <num>, <num>
Analyzer: MD1 function on, MD0 function off
See Also [w)
“Marker Operation” in Chapter 1.
“Programming Typical Measurements” in Chapter 1.
Delta Mkr Ref
Function Group
Menu Map
Description
Programming Codes
See Also
MARKER
3
This softkey displays the five markers available as the delta marker
reference. The delta marker frequency is calculated using the
equation:
f&=fm-fmref
where f, is the frequency of the active marker and fmFef is the
frequency of the reference marker.
SCPI: MARKer:REFerenc <marker number>
Analyzer: MD1 function on, MD0 function off.
Delta Marker
“Marker Operation” in Chapter 1.
“Programming Typical Measurements” in Chapter 1.
Disp Status
Function Group
SYSTEM
Menu Map k
D-6 Operating and Programming Reference
HP 8360
User’s Handbook