HP 8360 - Address; Adrs Menu

Address
Function Group
Menu Map
Description
Programming Codes
See Also
SYSTEM
8
The 8360 Adrs softkey lets you change the HP-IB address of the
synthesizer. Enter the address desired using the numeric entry keys
or the up/down arrow keys. The address value may be set between
0 and 30. The synthesizer stores the address value in non-volatile
memory. The default address of the synthesizer is 19.
SCPI: SYSTem:COMMunicate:GPIB:ADDRess
Analyzer: NONE
Connectors, HP-IB
Menu
“Getting Started Programming,” in Chapter 1.
“Programming Typical Measurements,” in Chapter 1.
Adrs Menu
Function Group
SYSTEM
Menu Map 8
Description
This softkey accesses the HP-IB address menu.
Meter Adrs
Controls the system power meter address.
8360 Adrs
Can control the synthesizer’s address, depending
on the setting of the rear panel HP-IB switch.
Printer Adrs
Controls the system printer address.
HP 8360
User’s Handbook
Operating and Programming Reference A-l