HP 8360 - Instruments Covered by this Manual

PREFACE
This manual provides user information for the HP 8360 Series
Synthesized Sweepers.
Instruments Covered
This manual applies to instruments having a serial number prefix
By This Manual
listed on the title page (behind the “Documentation Map” tab).
Some changes may have to be made to this manual so that it
applies directly to each instrument; refer to Chapter 5, “Instrument
History”, to see what changes may apply to your instrument.
A serial number label (Figure O-l) is attached to the instrument’s
rear panel. A prefix (four digits followed by a letter), and a suffix
(five digits unique to each instrument), comprise the instrument
serial number.
SERIAL NUMBER
PREFIX SUFFIX
-f----l
i SER
1234A 12345
7
INSTALLED
OPTIONS
Figure O-l. Typical Serial Number Label
An instrument’s prefix that is not listed on the title page may
indicate that the instrument is different from those documented
in this manual. For serial number prefixes before those listed
on the title page, refer to the HP 8360 Series Synthesized
Sweepers Instrument History (to order, see “Replaceable Parts” in
Assembly-Level Repair).
vii