Changing the Preset
1. Setup the synthesizer in the desired operation state to be used as
Parameters
the preset state.
2. Refer to menu map 8.
3. Press SYSTEM
(e).
4.
Select Save User Preset.
5.
Select Preset Mode User.
Whenever the
(PRESET)
key is pressed, the synthesizer will return to
the operation state setup and saved in steps 1 and 4. The synthesizer
displays:
*** USER DEFINED PRESET RECALLED ***
and also gives you the option of selecting the factory preset state by
creating a factory preset
softkey.
1-54 Getting Started Advanced
To Next Page
