HP 8360 - List Mode Pt Trigauto; List Mode Pt Trigbus

List Mode Pt Trig
Auto
Function Group
FREQUENCY
Menu Map 2
Description
This softkey lets you set the synthesizer to automatically step
through a frequency list, when the synthesizer is in sweep list mode.
Programming Codes
SCPI: LIST:TRIGger:SOURce IMMediate
Analyzer: NONE
See Also
List Menu, Pt Trig Menu, Sweep Mode List
“Creating and Using a Frequency List,” in Chapter 1.
List Mode Pt Trig
Bus
Function Group
Menu Map
Description
Programming Codes
See Also
FREQUENCY
2
This softkey lets you set the trigger point to be the HP-IB. When the
synthesizer receives an HP-IB trigger, it steps to the next frequency
point of the frequency list, provided the synthesizer is in sweep list
mode.
SCPI: LIST:TRIGger:SOURce BUS
Analyzer: NONE
List Menu, Pt Trig Menu, Sweep Mode List
“Creating and Using a Frequency List,” in Chapter 1.
L-8 Operating and Programming Reference
HP 8360
User’s Handbook