HP 8360 - Page 157

ALC BW Menu
to remain there for all sweep and
modulation conditions.
See Also (ALC)
“Optimizing Synthesizer Performance” in Chapter 1.
Altmate Rep
Function Group
SYSTEM
Menu Map 8
Description
This softkey causes the synthesizer to alternate on successive sweeps
between the present instrument state and a second instrument state
stored in an internal register (1 to 8). Select Altrnate Regs once to
turn it on, a second time to turn it off. An asterisk next to the key
label indicates that this feature is active.
Programming Codes
SCPI:
SYSTem:ALTernate:STATe ONlOFFlllO
SYSTem:ALTernate <num>IMAXimumIMINimum
Analyzer: ALln, where n= 1 through 8 function on, AL0 function off
See Also
[RECALL), (SAVE)
“Saving and Recalling an Instrument State” in Chapter 1.
AM BW Cal Always
Function Group
Menu Map
Description
Programming Codes
See Also
USER CAL
9
This softkey causes an AM bandwidth calibration to be performed
every time a frequency or power parameter is changed.
SCPI: CALibration:AM:AUTO ON
Analyzer: NONE
Modulation
A-12 Operating and Programming Reference
HP 8360
User’s Handbook