HP 8360 - Page 37

dLETT
, ,- ENlRRy
K
.ARO
-
INSWMENT STATE
SOURCE MODULE INTERFACE
SWEEP LED
CW Operation
cw START
STOP
Figure 1-4. CW Operation and Start/Stop Frequency Sweep
start/stop
Frequency Sweep
1. Press Icw).
2. Enter
value.
3. Press terminator key.
1.
Press @TiF).
2.
Enter value.
3. Press terminator key.
4. Press (FiSj.
5.
Enter value.
6. Press terminator key.
Getting Started Basic 1-7