8-56 ES User’s Guide
Hardkey/Softkey Reference
M
Softkey in the display frequency resolution menu and the numeric
entry menu.
When pressed in the display frequency resolution menu, displays the
frequency to MHz resolution. For example, 1.234 567 MHz is displayed
as 1 MHz (note rounding down).
Access Keys:
Softkey in the edit limit (min/max) menu. Use this key to set the
minimum limit for the marker limit function that is currently
highlighted in the on-screen table.
See “To Use Marker Limit Functions” on page 4-32 for more
information.
Access Keys:
Softkey in the marker search menu. Places the active marker at the
frequency point of minimum amplitude. If tracking is off, the marker
remains at that frequency. If tracking is on, the marker moves to the
minimum point with each sweep.
See “Using Markers” on page 4-3 for more information.
Access Keys:
Softkey in the menu. Displays the menu with selections
suitable for mixer and frequency converter measurements: conversion
loss and S
11
.
See “Measuring Conversion Loss” on page 3-61 for an example
conversion loss measurement.
Softkey in the annotation options menu. Toggle to ON if you want to
view the marker information in the upper right corner of the display.
See “Customizing the Display” on page 4-45 for more information.
Access Keys:
FREQ
DISPLAY
MARKER
BEGIN
DISPLAY
To Next Page
Loading...
Need help?
General
