HP A5500 SI Switch Series User Manual

175
[SwitchB] display pim bsr-info
VPN-Instance: public net
Elected BSR Address: 10.110.9.1
Priority: 64
Hash mask length: 30
State: Accept Preferred
Scope: Global
Uptime: 00:01:45
Expires: 00:01:25
Elected BSR Address: 10.110.1.2
Priority: 64
Hash mask length: 30
State: Elected
Scope: 239.0.0.0/8
Uptime: 00:04:54
Next BSR message scheduled at: 00:00:06
Candidate BSR Address: 10.110.1.2
Priority: 64
Hash mask length: 30
State: Elected
Scope: 239.0.0.0/8
Candidate RP: 10.110.1.2(Vlan-interface101)
Priority: 192
HoldTime: 150
Advertisement Interval: 60
Next advertisement scheduled at: 00:00:15
# View the BSR information and the locally configured C-RP information on Switch D.
[SwitchD] display pim bsr-info
VPN-Instance: public net
Elected BSR Address: 10.110.9.1
Priority: 64
Hash mask length: 30
State: Accept Preferred
Scope: Global
Uptime: 00:01:45
Expires: 00:01:25
Elected BSR Address: 10.110.4.2
Priority: 64
Hash mask length: 30
State: Elected
Scope: 239.0.0.0/8
Uptime: 00:03:48
Next BSR message scheduled at: 00:01:12
Candidate BSR Address: 10.110.4.2
Priority: 64
Hash mask length: 30
State: Elected

HP A5500 SI Switch Series Specifications

General

Layer Support	Layer 2 and Layer 3
MAC Address Table	16K entries
Routing Protocol	RIP, OSPF, BGP, IS-IS
Management	Web, CLI, SNMP
Input Voltage	100-240 V AC
Operating Temperature	0°C to 45°C
Ports	48 x 10/100/1000 ports, 4 x 10-Gigabit SFP+ ports
Dimensions	440 x 430 x 44 mm
Weight	5.5 kg
Operating Humidity	10% to 95% (non-condensing)