HP A5500 SI Switch Series User Manual

299
2.
Evaluate the configuration of the multicast filter. Use the display current-configuration command to
display the configuration of the IPv6 multicast filter. Change the IPv6 ACL rule used in the source-
policy command so that the source IP address of the IPv6 multicast packets and the IPv6 multicast
group address can both match the IPv6 ACL rule.

HP A5500 SI Switch Series Specifications

General

Layer Support	Layer 2 and Layer 3
MAC Address Table	16K entries
Routing Protocol	RIP, OSPF, BGP, IS-IS
Management	Web, CLI, SNMP
Input Voltage	100-240 V AC
Operating Temperature	0°C to 45°C
Ports	48 x 10/100/1000 ports, 4 x 10-Gigabit SFP+ ports
Dimensions	440 x 430 x 44 mm
Weight	5.5 kg
Operating Humidity	10% to 95% (non-condensing)