305
Field Descri
tion
Number of Sources
• This field is set to 0 in a general query message or a multicast-
address-specific query message.
• This field represents the number of source addresses in a multicast-
address-and-source-specific query message.
Source Address( i )
IPv6 multicast source address in a multicast-address-specific query
message. i represents the number of multicast source addresses.)
MLD report message
A host sends an MLD report message to report the current multicast listening state.
Figure 80 MLDv2 report message format
...
Table 11 MLDv2 report message field description
Field Descri
tion
Type = 143
Message type. For a report message, this field is set to 143.
Reserved
The Reserved fields are set to 0 on transmission and ignored
on reception.
Checksum
Standard IPv6 checksum
Number of Multicast Address Records
This field indicates how many IPv6 multicast address records
are present in this report message.
Multicast Address Record(i)
This field represents information of each IPv6 multicast address
the host listens to on the interface from which the report
message is sent, including record type, IPv6 multicast address,
and IPv6 multicast source address on the sender. i represents
the number of IPv6 multicast address records.
To Next Page
Loading...
Need help?
General
