HP A5500 SI Switch Series

388
Elected BSR Address: 8001::1
Priority: 64
Hash mask length: 126
State: Accept Preferred
Scope: 14
Uptime: 00:01:45
Expires: 00:01:25
Elected BSR Address: 3002::2
Priority: 64
Hash mask length: 126
State: Elected
Scope: 4
Uptime: 00:03:48
Next BSR message scheduled at: 00:01:12
Candidate BSR Address: 3002::2
Priority: 64
Hash mask length: 126
State: Elected
Scope: 4
Candidate RP: 3002::2(Vlan-interface104)
Priority: 192
HoldTime: 130
Advertisement Interval: 60
Next advertisement scheduled at: 00:00:10
# View the BSR information and the locally configured C-RP information on Switch F.
[SwitchF] display pim ipv6 bsr-info
Elected BSR Address: 8001::1
Priority: 64
Hash mask length: 126
State: Elected
Scope: 14
Uptime: 00:01:11
Next BSR message scheduled at: 00:00:49
Candidate BSR Address: 8001::1
Priority: 64
Hash mask length: 126
State: Elected
Scope: 14
Candidate RP: 8001::1(Vlan-interface109)
Priority: 192
HoldTime: 130
Advertisement Interval: 60
Next advertisement scheduled at: 00:00:55
To view the RP information learned on a switch, use the display pim ipv6 rp-info command. For
example: