HP A5500 SI Switch Series User Manual

54
4. If PIM is disabled on the switch, one of the following occurs:
{ If IGMP is disabled, the switch deletes all its dynamic router ports.
{ If IGMP is enabled, the switch maintains all its dynamic member ports and dynamic router
ports.

HP A5500 SI Switch Series Specifications

General

Layer Support	Layer 2 and Layer 3
MAC Address Table	16K entries
Routing Protocol	RIP, OSPF, BGP, IS-IS
Management	Web, CLI, SNMP
Input Voltage	100-240 V AC
Operating Temperature	0°C to 45°C
Ports	48 x 10/100/1000 ports, 4 x 10-Gigabit SFP+ ports
Dimensions	440 x 430 x 44 mm
Weight	5.5 kg
Operating Humidity	10% to 95% (non-condensing)