HP Compaq nc6220 User Manual

PC Cards
Hardware and Software Guide 6–3
Removal
Ä
CAUTION: To prevent loss of work or an unresponsive system, stop the
PC
Card before removing it.
✎
Stopping a PC Card if it is not in use conserves power.
1. Stop the PC Card:
a. Select the Safely Remove Hardware icon in the
notification area. (A dialog box displays a list of
connected hardware.)
b. Select the PC Card, and then select the Stop button. (The
“Safe to Remove Hardware” message is displayed on your
screen.)
2. Press the PC Card eject button 1. This action extends the
button into position for releasing the PC Card.
3. To release the PC Card, press the extended PC Card eject
button.
4. Gently slide out the card 2.

HP Compaq nc6220 Specifications

General

Display	14.1-inch TFT
Maximum Memory	4 GB
Hard Drive Interface	ATA-100
Graphics	Intel Graphics Media Accelerator 900
Operating System	Windows XP Professional
Battery Life	Up to 4 hours
Processor	Intel Pentium M
Display Resolution	1024 x 768
Storage	40 GB
Networking	10/100/1000 Ethernet, 802.11b/g Wi-Fi
Ports	3 x USB 2.0, VGA, RJ-11, RJ-45, headphone/microphone jacks
Optical Drive	DVD-ROM
RAM	512 MB to 2 GB