HP Compaq nc6220 User Manual

Drives
Hardware and Software Guide 5–15
Displaying Optical Disc Contents
When an optical disc is inserted into a drive and autorun is
enabled, the contents of the disc display on the screen.
To display the contents of a disc when autorun is not enabled:
1. Select Start > Run, and then type:
x:
where x is the designation of the drive containing the disc.
2. Press enter.
Avoiding Standby or Hibernation
Ä
CAUTION: To prevent possible video degradation and loss of audio or
video playback functionality, do not initiate standby or hibernation
while playing any type of media.
If standby or hibernation is accidentally initiated while a drive
medium (such as a diskette, CD, CD-RW, or DVD) is in use, the
following results may occur:
■ Your playback may be interrupted.
■ You may see the following warning: “Putting the computer
into hibernation or standby may stop the playback. Do you
want to continue?” Select No.
Resume from standby or restore from hibernation by pressing the
power button to the left or right. Audio or video may resume or
you may need to restart the
medium.

HP Compaq nc6220 Specifications

General

Display	14.1-inch TFT
Maximum Memory	4 GB
Hard Drive Interface	ATA-100
Graphics	Intel Graphics Media Accelerator 900
Operating System	Windows XP Professional
Battery Life	Up to 4 hours
Processor	Intel Pentium M
Display Resolution	1024 x 768
Storage	40 GB
Networking	10/100/1000 Ethernet, 802.11b/g Wi-Fi
Ports	3 x USB 2.0, VGA, RJ-11, RJ-45, headphone/microphone jacks
Optical Drive	DVD-ROM
RAM	512 MB to 2 GB