HP Compaq nc6220 User Manual

Power
Hardware and Software Guide 2–14
Setting or Changing a Power Scheme
The Power Schemes tab in the Power Options Properties dialog
box assigns power levels to system components. You can assign
different schemes depending on whether the notebook is running
on a battery pack or on external power.
You can also set a power scheme that initiates standby or turns off
the display or hard drive after a time interval that you specify.
To set a power scheme:
1. Access the Power Options Properties > Power
Schemes
tab.
2. Select the power scheme you want to modify, and adjust
options in the lists on the screen.
3. Select Apply.
Using a Security Password
You can add a security feature that prompts you for a password
when the notebook is turned on or resumes from standby or
restores from hibernation.
To set a password prompt:
1. Access Power Options Properties > Advanced tab.
2. Select the check box for Prompt for password when the
computer resumes from Standby.
3. Select Apply.
For more information about using security passwords, refer to
Chapter 12, “Security.”

HP Compaq nc6220 Specifications

General

Display	14.1-inch TFT
Maximum Memory	4 GB
Hard Drive Interface	ATA-100
Graphics	Intel Graphics Media Accelerator 900
Operating System	Windows XP Professional
Battery Life	Up to 4 hours
Processor	Intel Pentium M
Display Resolution	1024 x 768
Storage	40 GB
Networking	10/100/1000 Ethernet, 802.11b/g Wi-Fi
Ports	3 x USB 2.0, VGA, RJ-11, RJ-45, headphone/microphone jacks
Optical Drive	DVD-ROM
RAM	512 MB to 2 GB