HP Compaq nc6220 User Manual

SD Cards
Hardware and Software Guide 7–3
Removal
Ä
CAUTION: To prevent loss of work or system lockup, stop the SD Card
before removing it.
To remove an SD Card:
1. Close all files and applications using the SD Card.
2. Stop the SD Card:
a. Select the Safely Remove Hardware icon in the
notification area. (A dialog box displays a list of
connected hardware.)
b. Select the SD Card, and then select the Stop button. (The
“Safe to Remove Hardware” message is displayed on your
screen.)
3. Gently press in on the SD Card 1 to unlock it.
4. Slide the SD Card from the slot 2.

HP Compaq nc6220 Specifications

General

Display	14.1-inch TFT
Maximum Memory	4 GB
Hard Drive Interface	ATA-100
Graphics	Intel Graphics Media Accelerator 900
Operating System	Windows XP Professional
Battery Life	Up to 4 hours
Processor	Intel Pentium M
Display Resolution	1024 x 768
Storage	40 GB
Networking	10/100/1000 Ethernet, 802.11b/g Wi-Fi
Ports	3 x USB 2.0, VGA, RJ-11, RJ-45, headphone/microphone jacks
Optical Drive	DVD-ROM
RAM	512 MB to 2 GB