Drives
Hardware and Software Guide 5–3
IDE Drive Light
The IDE drive light is turned on when the primary hard drive, or a
hard drive or optical drive in the MultiBay
II, is being accessed.
Primary Hard Drive
Ä
CAUTION: To prevent system lockup and loss of information:
Shut down the notebook before removing the hard drive from the hard
drive bay. Do not remove the hard drive while the notebook is on, in
standby, or in hibernation.
The hard drive that is in the hard drive bay is the primary hard
drive. Remove it only after the notebook is properly shut down.
To Next Page
Loading...
