HP Compaq nc6220 User Manual

Modem and Networking
Hardware and Software Guide 10–8
6. Select your current location from the Country/region
drop-down list. If you select a country or region that is
not supported by the modem, the Country/region
selection for USA or UK is displayed by default.
7. Select Apply > OK.
8. In the Phone and Modem Options window, select
Modems.
9. Select your modem, and then select Properties.
10. Clear the check box for Wait for Dial Tone Before
Dialing.
11. Select OK > OK.
Preinstalled Communication Software
To use preinstalled modem software for terminal emulation and
data transfer:
1. Select Start > All Programs > Accessories >
Communications.
2. Select the appropriate fax or terminal emulation program or
Internet connection wizard.

HP Compaq nc6220 Specifications

General

Display	14.1-inch TFT
Maximum Memory	4 GB
Hard Drive Interface	ATA-100
Graphics	Intel Graphics Media Accelerator 900
Operating System	Windows XP Professional
Battery Life	Up to 4 hours
Processor	Intel Pentium M
Display Resolution	1024 x 768
Storage	40 GB
Networking	10/100/1000 Ethernet, 802.11b/g Wi-Fi
Ports	3 x USB 2.0, VGA, RJ-11, RJ-45, headphone/microphone jacks
Optical Drive	DVD-ROM
RAM	512 MB to 2 GB