HP Compaq nc6220 User Manual

Client Management Solutions
Hardware and Software Guide C–2
Configuration and Deployment
HP computers come with a preinstalled system software image.
The initial software image is configured during the first-time
setup of the computer. After a brief software “unbundling”
occurs, the computer is ready to be used.
A customized software image can be deployed (distributed) by
■ Installing additional software applications after unbundling
the preinstalled software image.
■ Using software deployment tools, such as Altiris Deployment
Solutions, to replace the preinstalled software with a
customized software image.
■ Using a disk cloning process to copy the contents from one
hard drive to another.
The deployment method you should use depends on your
organization’s technology environment and processes. Visit
the
HP Web site at http://www.hp.com/go/pcsolutions for more
information on selecting the best deployment method for your
organization.
✎
The system recovery discs, Computer Setup utility, and other
system features provide further assistance with recovery of
system software, configuration management and troubleshooting,
and power management.

HP Compaq nc6220 Specifications

General

Display	14.1-inch TFT
Maximum Memory	4 GB
Hard Drive Interface	ATA-100
Graphics	Intel Graphics Media Accelerator 900
Operating System	Windows XP Professional
Battery Life	Up to 4 hours
Processor	Intel Pentium M
Display Resolution	1024 x 768
Storage	40 GB
Networking	10/100/1000 Ethernet, 802.11b/g Wi-Fi
Ports	3 x USB 2.0, VGA, RJ-11, RJ-45, headphone/microphone jacks
Optical Drive	DVD-ROM
RAM	512 MB to 2 GB