HP Compaq nc6220 User Manual

Modem and Networking
Hardware and Software Guide 10–10
To connect the network cable:
1. Plug the network cable into the RJ-45 (network) jack 1 on
the notebook.
2. Plug the other end of the cable into a network wall jack 2.
✎
Your notebook is equipped with LAN Power Save mode, which
enables you to conserve battery power. LAN Power Save mode
turns off the LAN device when the notebook is not connected
to
external power and the network cable is disconnected. For
more information, refer to
“Using LAN Power Save Mode” in
Chapter 2, “Power.”

HP Compaq nc6220 Specifications

General

Display	14.1-inch TFT
Maximum Memory	4 GB
Hard Drive Interface	ATA-100
Graphics	Intel Graphics Media Accelerator 900
Operating System	Windows XP Professional
Battery Life	Up to 4 hours
Processor	Intel Pentium M
Display Resolution	1024 x 768
Storage	40 GB
Networking	10/100/1000 Ethernet, 802.11b/g Wi-Fi
Ports	3 x USB 2.0, VGA, RJ-11, RJ-45, headphone/microphone jacks
Optical Drive	DVD-ROM
RAM	512 MB to 2 GB