HP Compaq nc6220 User Manual

Software Update and Recovery
Hardware and Software Guide 14–6
Installing a ROM Update
ROM installation procedures vary. Follow any instructions that
are displayed on the screen after the download is complete. If no
instructions are displayed:
1. Open Windows Explorer by selecting Start > All Program >
Accessories > Windows Explorer.
2. In the left pane of the Windows Explorer window:
a. Select My Computer > your hard drive designation. (The
hard drive designation is typically Local Disk C.)
b. Follow the path you recorded earlier to the folder on your
hard drive that contains the update.
3. Begin the installation:
a. Open the folder that contains the update.
b. Double-click the file with an .exe extension—for
example, filename.exe. (The ROM update installation
begins.)
4. Complete the installation by following the instructions on the
screen.
✎
After a message on the screen reports a successful installation,
you can delete the download file from the folder.

HP Compaq nc6220 Specifications

General

Display	14.1-inch TFT
Maximum Memory	4 GB
Hard Drive Interface	ATA-100
Graphics	Intel Graphics Media Accelerator 900
Operating System	Windows XP Professional
Battery Life	Up to 4 hours
Processor	Intel Pentium M
Display Resolution	1024 x 768
Storage	40 GB
Networking	10/100/1000 Ethernet, 802.11b/g Wi-Fi
Ports	3 x USB 2.0, VGA, RJ-11, RJ-45, headphone/microphone jacks
Optical Drive	DVD-ROM
RAM	512 MB to 2 GB