HP Compaq nc6220 User Manual

Hardware and Software Guide B–1
B
MultiBoot
A bootable medium or network interface card (NIC) contains files
that the notebook needs to start and operate properly. The
MultiBoot utility, disabled by default, enables you to identify the
bootable devices and control the sequence in which the system
attempts to boot from those devices as it starts up your notebook.
Bootable devices include optical drive discs, such as CDs or
DVDs, bootable diskettes, or a NIC.
✎
Some devices, including USB devices and NICs, must be enabled
in Computer Setup before they can be included in the boot
sequence. For more information, refer to the
“Bootable Devices
in Computer Setup” section in this chapter.

HP Compaq nc6220 Specifications

General

Display	14.1-inch TFT
Maximum Memory	4 GB
Hard Drive Interface	ATA-100
Graphics	Intel Graphics Media Accelerator 900
Operating System	Windows XP Professional
Battery Life	Up to 4 hours
Processor	Intel Pentium M
Display Resolution	1024 x 768
Storage	40 GB
Networking	10/100/1000 Ethernet, 802.11b/g Wi-Fi
Ports	3 x USB 2.0, VGA, RJ-11, RJ-45, headphone/microphone jacks
Optical Drive	DVD-ROM
RAM	512 MB to 2 GB