Power
Hardware and Software Guide 2–2
Component Description
1
Power button* When the notebook is
■ Off, press and release to turn on
the notebook.
■ In standby, press and release to
exit standby.
■ In hibernation, press and release
to restore from hibernation.
If the notebook has stopped
responding and Microsoft Windows
shutdown procedures cannot be used,
press to the left and hold for 5
seconds
to turn off the notebook.
2
Power/standby lights On: The notebook is on.
Blinking: The notebook is in
standby
mode.
3
Battery light Amber: A battery pack is charging.
Green: A battery pack is close to full
charge capacity.
Blinking amber: A battery pack that is
the only available power source has
reached a low-battery condition. When
the battery reaches a critical
low-battery condition, the battery light
begins blinking more quickly.
Off: If the notebook is connected to an
external power source, the light is
turned off when all batteries in the
notebook are fully charged. If the
notebook is not connected to an
external power source, the light is
turned off until the battery reaches a
low-battery condition.
*This table describes default settings. For information about changing the
functions of power features, refer to
“Power Options” in this chapter.
(Continued)
To Next Page
Loading...
Need help?
General
