HP Compaq nc6220 User Manual

Pointing Devices and Keyboard
Hardware and Software Guide 3–13
Presentation Mode
The first time you press Presentation mode button, a welcome
dialog box opens. This dialog box
enables you to program the
Presentation mode button to automatically open an item and
adjust the power settings for optimum viewing. This box also
enables you to control whether the welcome box is opened each
time you press the Presentation mode button.
If you check Don’t Show me this Dialog Box Again in the
welcome dialog box, you must open the Quick Launch Buttons
software to change settings.
Presentation Mode Button
The Presentation mode button toggles Presentation mode on and
off. Turning Presentation mode on opens an application, folder,
file, or Web site that you specify. The image simultaneously
displays on the notebook screen and an external device connected
to the external monitor port or S-Video-out jack on the rear panel,
or to ports and jacks on an optional docking device.

HP Compaq nc6220 Specifications

General

Display	14.1-inch TFT
Maximum Memory	4 GB
Hard Drive Interface	ATA-100
Graphics	Intel Graphics Media Accelerator 900
Operating System	Windows XP Professional
Battery Life	Up to 4 hours
Processor	Intel Pentium M
Display Resolution	1024 x 768
Storage	40 GB
Networking	10/100/1000 Ethernet, 802.11b/g Wi-Fi
Ports	3 x USB 2.0, VGA, RJ-11, RJ-45, headphone/microphone jacks
Optical Drive	DVD-ROM
RAM	512 MB to 2 GB