Pointing Devices and Keyboard
Hardware and Software Guide 3–16
To turn the ambient light sensor on and off using a hotkey,
press
fn+f11.
You can turn on and off the ambient light sensor using the Quick
Launch Buttons software:
1. Open the Quick Launch Buttons software:
❏ Select Start > Control Panel > Printers and Other
Hardware > Quick Launch Buttons.
– or –
❏ Double-click the Quick Launch Buttons software icon in
the notification area.
2. Select the Advanced tab.
3. Select or deselect the Enable Ambient Light Sensor
check
box.
4. Select Apply, and then select OK.
To Next Page
Loading...
