HP Compaq nc6220 User Manual

Pointing Devices and Keyboard
Hardware and Software Guide 3–20
Enabling and Disabling
Press fn+num lk to enable the embedded numeric keypad. The
num lock light is turned on. Press
fn+num lk again to return
the
keys to their standard keyboard functions.
✎
The embedded numeric keypad does not work while an external
keyboard or keypad is connected to the notebook or to an optional
docking device.
Switching Key Functions
You can temporarily switch the functions of keys on the
embedded numeric keypad between their standard keyboard
functions and their keypad functions by using the
fn key or the
fn+shift key combination.
■ To change the function of a keypad key to keypad functions
while the keypad is off, press and hold the
fn key while
pressing the keypad key.
■ To use the keypad keys temporarily as standard keys while
the keypad is on:
❏ Press and hold the fn key to type in lowercase.
❏ Press and hold fn+shift to type in uppercase.

HP Compaq nc6220 Specifications

General

Display	14.1-inch TFT
Maximum Memory	4 GB
Hard Drive Interface	ATA-100
Graphics	Intel Graphics Media Accelerator 900
Operating System	Windows XP Professional
Battery Life	Up to 4 hours
Processor	Intel Pentium M
Display Resolution	1024 x 768
Storage	40 GB
Networking	10/100/1000 Ethernet, 802.11b/g Wi-Fi
Ports	3 x USB 2.0, VGA, RJ-11, RJ-45, headphone/microphone jacks
Optical Drive	DVD-ROM
RAM	512 MB to 2 GB