HP DesignJet T1700dr

Enable email printing with HP ePrint
The HP Connected service makes it easy to send jobs to your printer by attaching them to an email message.
You must accept the Printer Data Sharing Agreement in order to use HP Connected.
To congure the email printing conguration, tap , then Services. Scroll down until you nd the HP ePrint
card, which will display your printer’s email address, which can be used to send jobs to the printer. Double-click
the HP ePrint card to access the printer's code and other conguration details.
If you are the printer administrator, log in at HP Connected (http://www.hpconnected.com) to customize your
printer’s email address or manage printer security for remote printing.
You must also visit http://www.hpconnected.com to register yourself and your printer (using the printer code).
Congure your HP ePrint connection
By default, the jobs sent by email are directly printed. To change the settings, tap , then at the right
top corner of the page, then Services > HP Connected > HP ePrint jobs > On hold.
You can disable the connection to HP ePrint if required for security. At the front panel, tap , then at
the right top corner of the page, then Services > HP Connected > Disable.
Disable just puts the remote printing function on hold. If you want to resume using it, you just need to re-enable
it in the same menu. No more setup steps are required.
If you want to disable remote printing permanently, tap Remove. To use remote printing again, you will need to
set it up again from scratch.
Congure rmware updates
You can choose from the Embedded Web Server or from the front panel whether and how to download rmware
updates.
NOTE: If an administrator password has been set, it will be required to change these settings.
● In the Embedded Web Server: Click About printer > Firmware update.
● Using the front panel: Tap , then System > Firmware update.
The following settings are available:
● Download new rmware automatically: If you select Automatically (the default setting), the printer will
automatically download new rmware whenever it becomes available. Deactivate this option to download
new rmware manually.
NOTE: Downloading the rmware does not mean that you have installed it in your printer. To install the
new rmware, you must conrm the installation manually.
● Firmware update history: A list of rmware versions that have been installed in the printer. It is usually
possible to reinstall the version immediately before the version that is currently installed, if you have some
problem with the current version.
18 Chapter 1 Introduction ENWW