● If a printer queue is shared from another computer, this paper size will not appear on the driver´s
document size list. A Windows form in a shared queue needs to be created in the server.
● If the printer queue is deleted, the paper size is not deleted.
Use the Mac OS X printer driver
1. Go to the Page Setup dialog.
NOTE: If your application oers no Page Setup dialog, use the Print dialog.
2. Select Paper Size > Manage Custom Sizes.
Select margin options
By default, the printer leaves a 5 mm margin between the edges of your image and the edges of the paper
(increased to 17 mm at the foot of cut-sheet paper). However, you can change this behavior in several ways:
● In the Windows driver dialog: Select the Paper/Quality tab, and click the Margins/Cutter Settings button. The
Layout and Margins window is displayed.
● In the Mac OS X Print dialog: Select the Margins/Layout panel.
● Using the front panel: Tap , then Default printing conguration > Margins.
You will then see at least some of the following options.
NOTE: Under Mac OS X, the available margins options depend on the paper size selected. For instance, for
borderless printing you must select a paper size name that includes the word “borderless”.
● Use application settings. Your image will be printed on a page of the size you have selected, with a narrow
margin between the edges of the image and the edges of the paper. The image should be small enough to
t between the margins.
● Oversize. Your image will be printed on a page slightly larger than the size you have selected. If you cut o
the margins, you will be left with a page of the size you selected, with no margins remaining between your
image and the edges of the paper.
● Clip Contents By Margins. Your image will be printed on a page of the size you have selected, with a narrow
margin between the edges of the image and the edges of the paper. In this case, if the image is the same
size as the page, the printer assumes that the extreme edges of the image are either white or unimportant,
and do not need to be printed. This may be useful when your image already contains a border.
Print on loaded paper
To print a job on whichever paper is loaded in the printer, choose the following Paper Type option in your printer
driver:
● In the Windows driver dialog: Select the Paper/Quality tab, then select Use Printer Settings in the Paper
Type drop-down list.
● In the Mac OS X Print dialog: Select the Paper/Quality panel, then select Any in the Paper Type drop-down
list.
NOTE: Use Printer Settings (Windows) or Any (Mac OS X) is the default Paper Type selection.
ENWW Advanced print settings 53
To Next Page
Loading...