Chapter 3
Upgrade Procedures for 1.5 GHz (A9731A) or 1.6 GHz (A9732A, or A9733A) Processors
Introduction
46
Step 4. Plug in the processor cable to its socket on the extender board.
Step 5. Place the sequencer frame over the processor.
Step 6. Using the supplied CPU install tool, tighten the T15 shoulder screws 1, 2, 3, and 4 until they just
bottom out. Follow the tightening sequence shown in Figure 3-3, “Installing Processor on Extender
Board.”
To Next Page
Loading...
