Using the Phone Features
User’s Guide 4–31
Creating a CSD Connection
1. If you tapped CSD (Circuit Switched Data) on the network
selection screen, the next screen requires you to fill in the
following CSD configuration information. You can get this
information from your CSD Service Provider (ISP provider)
if you do not have it.
❏ Number: The phone number of the ISP that you want to
connect to.
❏ Name: Log On name for your connection.
❏ Password: Password for your connection.
❏ Tap Next to continue.
2. On the next screen, select the IP Address to be used during
your connection:
❏ Dynamic IP Address
❏ Static IP Address
3. Tap Next.
4. On the next screen, select the name-server to be used during
your connection.
❏ Dynamic IP address
❏ Static IP address
5. Enter the required information (DNS, DNS aux, WINS, and
WINX aux).
6. Tap Next.
NOTE: When you are creating a new connection, the next screen
to display is the SMS Text Messaging screen.
Creating an SMS Text Message Connection
1. On the SMS Text Messaging screen, under Enter the Service
Center Number box, enter the phone number to which all
SMS messages will be sent for delivery by the network.
To Next Page
Loading...
